|
|
|
|
|
|
|
|

Domes first appeared on round huts and tombs in the ancient Middle East, India, and the Mediterranean in forms, such as solid mounds, adaptable only to the smallest buildings. The Romans introduced the large-scale masonry hemisphere. A dome exerts thrust all around its perimeter, and the earliest monumental examples (see Pantheon) required heavy supporting walls. Byzantine architects invented a technique for raising domes on piers, making the transition from a cubic base to the hemisphere by four pendentives. Bulbous or pointed domes were widely used in Islamic architecture. The design spread to Russia, where it gained great popularity in the form of the onion dome, a pointed, domelike roof structure. The modern geodesic dome, developed by R. Buckminster Fuller, is fabricated of lightweight triangular framing that distributes stresses within the structure itself.

A corbel dome is different from a 'true dome' in that it consists of purely horizontal layers. As the layers get higher, each is slightly cantilevered, or corbeled, toward the center until meeting at the top. A famous example is the Mycenaean Treasury of Atreus.

The onion dome is a bulbous shape tapering smoothly to a point, strongly resembling an onion, after which they are named, and exemplified by Saint Basil's Cathedral in Moscow and the Taj Mahal. They are found mostly in eastern architecture, particularly in Russia, Turkey, India, and the Middle East. An onion dome is a type of architectural dome usually associated with Russian Orthodox churches. Such a dome is larger in diameter than the drum it is set upon and its height usually exceeds its width.

The oval dome is closely associated with the Baroque style. The term comes from the Latin ovum, meaning "egg". Though the oval dome is typically identified with churches of Bernini and Borromini, the first baroque oval dome was erected by Vignola for a chapel, Sant'Andrea in Via Flaminia often called Sant'Andrea del Vignola. Julius III commissioned the dome in 1552 and construction finished the following year.[22] The largest oval dome was built in the basilica of Vicoforte by Francesco Gallo.

A parabolic dome is a unique structure, in which bending stress due to the UDL of its dead load is zero. Hence it was widely used in buildings in ancient times, before the advent of composite structures. However if a point load is applied on the apex of a parabolic dome, the bending stress becomes infinite. Hence it is found in most ancient structures, the apex of the dome is stiffened or the shape modified to avoid the infinite stress.

Technically domical vaults, these are domes which maintain a polygonal shape in their horizontal cross section. The most famous example is the Renaissance octagonal dome of Filippo Brunelleschi over the Florence Cathedral. Thomas Jefferson, the third president of the United States, installed an octagonal dome above the West front of his plantation house, Monticello.

Also called sail vaults, pendentive domes, or Byzantine domes, this type can be thought of as pendentives which, rather than merely touching each other to form a circular base for a drum or compound dome, smoothly continue their curvature to form the dome itself. The dome gives the impression of a square sail pinned down at each corner and billowing upward.

A saucer dome is the architectural term used for a low pitched shallow dome which is described geometrically as having a circular base and a segmental (less than a semicircle) section. A section across the longer axis results in a low dome, capping the volume. A very low dome is a saucer dome. Many of the largest existing domes are of this shape. Gaining in popularity from the 18th century onwards, the saucer dome is often a feature of interior design. When viewed from below it resembles the shallow concave shape of a saucer. The dome itself, being often contained in the space between ceiling and attic, may be invisible externally. These domes are usually decorated internally by ornate plaster-work, occasionally they are frescoed. They are seen occasionally externally in Byzantine churches and Ottoman mosques. Most of the mosques in India, Pakistan, Iran and Afghanistan have these type of domes.

Also called pumpkin, melon, scalloped, or parachute domes, these are a type of dome segmented by ribs radiating from the center of the dome to the base. The material between the ribs arches from one to the other, transferring the downward force to them. The central dome of the Hagia Sophia uses this method, allowing a ring of windows to be placed between the ribs at the base of the dome. The central dome of St. Peter's Basilica also uses this method.

Domes that have been disproportionately influential in later architecture are those of the Pantheon in Rome, Hagia Sophia in Constantinople (modern Istanbul), and the Dome of the Rock in Jerusalem. In Western architecture, the most influential domes built after the early Renaissance exploit of Brunelleschi's Florentine dome have been those of St. Peter's Basilica in Rome and Jules Hardouin-Mansart's dome at Les Invalides in Paris. The dome of St. Paul's Cathedral in London was the inspiration for the United States Capitol in Washington, which in turn inspired domes of most of the US state capitols.

roofing-services-supermarket.com
Find Local Roofers & Roofing Services Nationwide
![]()
Tel: 0871 5989 529
E-mail: support[@]roofing-services-supermarket.com
|
|
|
Customer Services
Tel: 0871 5989 529
HELP & FAQ’S | About | Contact
Search The Web:
| Terms & Conditions | Privacy Policy | Disclaimer | Partner Links | Link To Us | Trade Register | Sitemap |
QFJ Media Network © 2011
Roof Dome | Domes | Roof Dome - A Quick Look at Roof Domes from around the world with beautiful roof dome photos & editorial
Roof Dome | Domes | Roof Dome - A Quick Look at Roof Domes from around the world with beautiful roof dome photos & editorial